WhatsApp Image 2019-01-06 at 4.13.02 PM.jpeg

 

Specifications

Air Unit and Controller

  • Processor: SoC – Pinecone S1 AP: 4 x large core, Cortex A53, 2.2GHz 4 x small core, Cortex A53, 1.4GHz GPU: 4 core, Mali-

  • T860 SDR: A7 + DSP Storage: Sky: LPDDR3: 1GB Ground: LPDDR3: 2GB Sky / Ground: EMMC: 4GB

  • Transmission Distance: FCC 20km CE / SRRC 12km Image transmission delay: ≤ 110ms Image transmission: 720p@30fps 1080p@30 / 60fps transmission

  • Frequency Band: 2.4GHz ISM Receive sensitivity: -99dBm@20MHz BW Interference recovery: < 1s

Air Unit

  • Appearance: core board + video daughter board + structure of RF daughter board

  • Among them, the video daughter board completes the input bridge function of the HDMI signal.

  • The RF daughter board completes the function of transmitting and receiving signals

  • M2 (E) connector connection between daughter board and core

  • Size: 78.5x30x13mm

  • Micro HDMI x 2: Input for external camera video signals

  • 2 Pin interface x 1:5V-12V power input interface

  • 3 Pin interface x 1:3.3V / 5V level UART interface

  • 4 Pin interface x 1: Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control)

  • Micro USB x 1: for debugging upgrades, support OTG mode

  • Keyhole x 1: for frequency and status reset

  • Indicator x 2: used to indicate the frequency and picture status

  • MMCX antenna jack x 2: used for signal transmission and ground communication

  • Signal bandwidth: 20MHz / 10MHz

  • Power consumption: the average power consumption of the single-sided module is less than 4W

Controller

  • Housing: plastic

  • Dimensions: 217 × 106.5 × 31mm (the whole machine does not contain external antenna and rocker)

  • Screen: 5.46 inch, 1080P, 16 million colors, capacitive touch screen

  • Audio: Built-in speaker × 1, built-in microphone × 2

  • Remote control: rocker × 2, scroll wheel × 1, bottom button × 6, with backlight, top button × 1 (right)

  • Communication : BT / WIFI / GPS 2.4G map transmission ground

  • Indicator light: Top tri-color lamp × 2 (left, right)

  • Interface: MicroUSB×1, TFlash×1 (supports maximum 64G expansion)

  • Antenna: Orientation (5dBi) × 1 detachable, omnidirectional (2dBi) × 1 detachable

  • Built-in wifi antenna, built-in GPS antenna, external GPS antenna interface

  • Power: Built-in 4950 mAh Lipo Battery

  • Charging: Support micro USB port 5v 2A current charging

  • Power consumption: The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)